Description chain and sprockets chain conveyors
At a speed not exceeding 0.5 m/s and with the correct strength, the chain has a long service life. Over time, clearance in the hinge points increases, making planned replacement necessary.
Request a quote
Jansen&Heuning supplies all sizes and types of chain on request and can deliver replacement chains very quickly from stock.
Drive and return sprockets are manufactured in-house and, if required, can be delivered within a few days.
Types of chain
The most common chain is the standard steel chain according to DIN8165, with type designation such as FV-112. The “112” indicates the breaking strength of the chain in kN.
For design purposes, the actual tensile load in operation should not exceed 12% to 15% of the breaking strength to ensure a long service life.
For products that may stick between the side plates of the FV chain, the more expensive fork chain is used.
Available from stock:
- Chain FV112, DIN8165, with a pitch of 125 mm
- Flights can be welded to the required width within a few working days
- With optional return buckets
- With cleaning strips for cleaning the corners of the trough
- Drive and return sprockets with hub, bore and keyway within a few working days
Even if a different chain is currently used, replacing the sprockets with the correct diameter ensures this chain can always be made suitable for the trough of the chain conveyor.
Contact
For more information or a tailored quotation, please contact Jansen&Heuning:
- Phone: +31(0)50 3126 448
- Email: sales@jh.nl
- Contact form: jh.nl/en/contact
